PAT -- Pro Audio & Television
Switch to NZ Site
  
Products     Brands     Customers     Videos     News     About Us     Contact Us     Service & Support     Careers    
Breakout Devices/Converters > DirectOut ANDIAMO 2.DA

ANDIAMO 2.DA is part of the ANDIAMO family of powerful, high-end AD/DA MADI converters. This unit provides unidirectional conversion of 32 audio channels from digital to analog with extremely high sonic quality. 
Housed in an elegant, space-saving 1U 19” casing, up to two units may be cascaded for 64 channels of conversion. 
Bank selection allows the choice of audio channels 1-32 or 33-64 from a MADI stream to be converted. Converter sensitivity can be switched between two levels (hi/lo).

The device may be operated locally or remotely via the ANDIAMO Remote software. Supported remote methods are USB, D.O.NET, ‘MIDI over MADI’ and ‘Serial over MADI’. 
ANDIAMO Remote (Windows® / OS X®) offers access to the following features (and many more):

  • Matrix Mode which offers free signal routing on a per-channel basis.
  • 4 FS support – the device supports sample rates from 44.1 kHz up to 192 kHz to meet the highest sonic demands
  • Level control – output gain/level trim for individual channels
  • DA calibration in 0.1 dB increments for precise adjustment of DA converter reference levels

The settings and the routing matrix are stored inside the device.

PORT REDUNDANCY 
ANDIAMO 2.DA is equipped with two MADI ports as standard, offering seamless port redundancy and switchover. Both MADI ports are always active and carry the same MADI data, except when the Extended Routing feature is deployed.

EXTENDED ROUTING 
The Extended Routing feature enables both MADI I/Os to be used independently to:

make full use of all conversion channels at higher sample rates (192 kHz)
double the range of available MADI input channels
create two individual MADI feeds

QUICK OVERVIEW 
The front panel provides level control and status LEDs for real-time monitoring of signal condition for all input and output channels.

CLOCKING 
Selectable clock sources are word clock, MADI input or the internal clock. The current system clock is provided at the word clock output at any time.

ADAPTABLE 
The device may be configured to order as follows:

  • Version "A":  +06 dBu / +15 dBu
  • Version "B":  +09 dBu / +18 dBu
  • Version "C":  +15 dBu / +24 dBu

SAFE OPERATION 
Thanks to two phase-redundant power supplies with separate IEC inlets and AC power switches on the rear panel the device offers the highest reliability.

TECHNICAL DATA

Interfaces

 

MADI ports (I/O):

2 x SC-Socket multi-mode
or
1 x SC-Socket multi-mode & 1 x coaxial BNC, 75 Ω

Analog (I/O):

4 x DSUB-25, balanced (output only), TASCAM pinout

Digital

 

Sample rates:

44.1, 48, 88.2, 96, 176.4, 192 kHz (+/- 12,5%)

MADI formats:

48k / 96k Frame, 56 / 64 channel, S/MUX

Analog

 

Analog Level (I):

+6 dBu / +15 dBu (digitally switchable) or
+9 dBu / +18 dBu (digitally switchable) or
+15 dBu / +24 dBu (digitally switchable)

A/D

 

SNR:

-115,5 dB RMS (20 Hz - 20 kHz) / -118 dB(A)

THD @ -1 dBFS:

-113 dB

Frequency response:

-0,15 dB (10 Hz) / -0,15 dB (20 kHz)

Sync

 

Word clock (I):

1 x coaxial BNC (75 Ω termination switchable),
AES11 (DARS also supported)

Word clock (O):

1 x coaxial BNC

Communication

 

Remote Software:

ANDIAMO REMOTE (Windows® & OS X®)

Remote Methods:

USB, Serial over MADI, MIDI over MADI, DONet

Global

 

Service:

USB 2.0 for firmware updates (Windows®) and remote control (Windows® & OS X®)

Power supply:

2 x 84 V to 264 V AC / 47 Hz to 63 Hz / safety class 1, phaseredundant

Power Consumption:

25 W

Dimensions:

Width 19'' (483 mm) 
Height 1 RU (44,5 mm) 
Depth 10'' (254 mm)

Weight:

about 3 kg

USB Serial driver:

Windows® & OS X®

Device variants

- per request

Single-mode:

MADI port: SC-Socket single-mode

Notes

TASCAM is a trademark of TEAC Corporation.